Passthrough Adapter 10mm/14mm

There really is no one way to describe the use of the Passthrough Adapter. It opens up a lot of doors in the way you can adapt your vaporizers.

The Passthrough Adapter comes standard with a 10mm glass plug which allows you to cut off the 10mm female joint. You can also use this 10mm joint to connect a second vaporizers or use it is an airport while having another device connected to the 14mm joint. Below are just a few ways you can use your Passthrough adapter.

With a Freight Train extraction chamber connected to the main 14mm joint you can then use the 10mm joint as a carb/air port. You can cover this 10mm joint up using your finger or simply pull the 10mm plug when you are ready to clear your glass piece.
With multiple vaporizers. This can be a little tricky but this Passthrough adapter does give you the ability to connect two vaporizers. You can connect just about every vaporizer through the 14mm connection while also connecting a vaporizer like dynavap through the 10mm joint. This makes for some very interesting results. And often surprising as this can hit you in the face when you get it right.
Using the 10mm or 14mm as a carb/airport. This is probably the most widely used method with the passthrough adapter. Connect your vaporizer up to the suitable sized joint then use the other joint as a shotty. Where possibly it is generally more user freindly to use the 10mm as the air port.
?
?
? If you have an idea in your head for the Passthrough Adapter there is a good chance it will work.